Networking; Tcp/Ip Ports - NEC EXPRESSSCOPE Engine 3 User Manual

4. Networking

TCP/IP PORTS

The BMC uses the TCP/IP ports listed below. If you use the BMC in a firewall environment,
you need to allocate the port numbers (shown in the right column) to the individual non-block
ports.
Module name
Remote Media
(Non-Encryption)
Remote Media
(Encryption)
Web browser
(Non-Encryption)
Web browser
(Encryption)
Remote KVM Console
(Non-Encryption)
Remote KVM Console
(Encryption)
SSH client
SMTP server
LDAP server
SNMP server
*1 The Dynamic ports are dynamically allocated ports and usually ranged from 1024 to
65535.
*2 Go to [Configuration]-[System Operation] to change the port number.
*3 Go to [Configuration]-[Network]-[Service] to change the port number.
*4 Go to [Configuration]-[Alert:]-[Mail Alert] to change the port number.
*5 If use TLS/SSL, default port number is 636.
*6 Go to [Configuration]-[User Management]-[LDAP] to change the port number.
BMC doesn't support connection via HTTP proxy server.
Port # Protocol
Dynamic(*1) TCP
Dynamic(*1) TCP
Dynamic(*1) TCP
Dynamic(*1) TCP
Dynamic(*1) TCP
Dynamic(*1) TCP
Dynamic(*1) TCP
25(*4) TCP
389(*5)(*6) TCP
162 UDP
Direction Module name
BMC
BMC
BMC
BMC
BMC
BMC
BMC
BMC
BMC
BMC
- -
14
Port #
5120(CD/DVD)
5122(USB MEM)
5123(FD) (*2)
5124(CD/DVD)
5126(USB MEM)
5127(FD) (*2)
80(*3)
443(*3)
7578(*2)
7582(*2)
22(*3)
Dynamic
Dynamic
Dynamic