Ws-Management (Web Service For Management); Overview; Power Control - NEC EXPRESSSCOPE Engine 3 User Manual

7. WS-Management (Web Service for
Management)

OVERVIEW

With the WS-Management Protocol, you can control the host system and check the sensor of
host system.
EXPRESSSCOPE Engine 3 implementation of WS-Management
complies with the specification, DTMF Web Services for Management
1.0.0.
EXPRESSSCOPE Engine 3 is confirmed the WS-Management operation
with the following tools that support the WS-Management protocol.
• Windows Remote Management (WinRM) 2.0
To use WS-Management, you need to configure HTTPS connection to
be enabled. Refer to the "Management LAN Settings" in the "Chapter
Notice
2: Configuring the Host System".

POWER CONTROL

You can perform power control of the host system.
The user must have an account as operator or administrator for
power control.
Performing power control when the operating system is running may
cause the loss of data in the host system.
Notice
- -
63