Command Line Interface; Overview; Connecting To Bmc - NEC EXPRESSSCOPE Engine 3 User Manual

6. Command Line Interface

OVERVIEW

With the BMC Command Line Interface, you can control the host system from a remote SSH
client. The BMC supports SSH (Version 2) protocol.

CONNECTING TO BMC

Access the BMC IP address or DNS host name from SSH client on the remote management
PC.
To use Command Line Interface, you need to change the
configuration of the command line interface (SSH) to be enabled by
any of the setting of the Off-line BMC Configuration Tool or On-line
BMC Configuration Tool or Setting of Web browser. Refer to the
"Management LAN Settings" in the "Chapter 2: Configuring the Host
System".
You can change the BMC's SSH port number by using the Off-line
BMC Configuration Tool, On-line BMC Configuration Tool or a web
browser. The default settings are as follows:
SSH:
A security warning messages regarding your server certificate may
be displayed when you access the BMC from a SSH client.
SSH connection is disconnected automatically after one minute of
inactivity after login prompt is displayed.
22
- -
29