NEC EXPRESSSCOPE Engine 3 User Manual page 39

• The UID LED will blink (flash) when it is controlled by Chassis
Identify function of management software such as ESMPRO/
ServerManager. The UID LED will turn on when it is controlled by
pushing the UID switch of the host system or using UID switch
control function of BMC's web server or command line interface.
For actual display state of the UID LED, blinking (flashing) the UID
LED is higher priority than turning on it when it is controlled at a
same time (blinking state AND turning on state).
• Blinking (flashing) UID LED by management software can be
turned off (release the blinking state) only by management
software. Turning on UID LED by UID switch control (actual switch
of the host system or the function of BMC's web server or
command line interface) can be turned off (release turning on
state) only by the UID switch control.
- -
39