Maintenance And Service; Maintainance Work - HAKO Hakomatic B 650 R Instruction Manual

8. Maintenance and service

8.1. Maintenance work
Compliance with our recommenda-
tions concerning maintenance work
will give you the certitude of always
having a dependable machine at your
disposal, which is in perfect operating
condition.
It is better to take precautions than to
repair damages - and less expensive.
Please contact your local Hako service
centre; your Hako dealer there will be
glad to perform the work for you. The
personal is qualified and the genuine
Hako spare parts are at your disposal.
All inquiries or orders require the serial
number of the machine. You will find it
at the nameplate of your Hako appli-
ance.
30
The nameplate is located at the right
rear chassis above the right-hand rear
wheel.
Before cleaning or servicing the
machine as well as before replacing
parts, switch motors off.
If the machine is battery-driven,
disconnect the battery plug.
Make sure to take precautions against
unintended starting of the appliance.
Make sure to protect the tank lid
against accidental closing or tilting
down before working in the area of a
lifted tank lid.
The machine may be taken into opera-
tion after all protective devices have
been fitted and positioned. As far as
possible, cleaning should not be done
by hand but using appropriate tools or
equipment.