5. Taking into operation
5.5 Plate brush head
5.5.1 Dismounting plate brush head
1 Locking hook
2 Right-hand separator, complete
3 Washer
4 Hex. screw
5 Hex. bolt
20
q
Lower plate brush head
q
Switch off by key switch and remo-
ve key
q
Engage parking brake
q
Disconnect battery plug (open seat
hood)
Locking hook (VII/1) unhook,
right-hand separator, complete
lowers itself on the soil
q
Loosen hex. nut (VII/4)
q
Loosen hex. bolt (VII/5)
q
Pull complete separator to the side
and put down
q
Separate water hose (VIII/2) and
solenoid valve
q
Separate electric lines and brush
motor
q
Remove split pin (VIII/4)
q
Remove bolt (VIII/3) from inside
q
Pull plate brush head to the right
side below the appliance
VII
1 Plate brush lift-out
2 Hose for water supply
3 Bolt
4 Split pin
5 Washer
6 Plate brush head
7 Sleeve
VIII