5. Taking into operation
5.5.2 Mounting plate brush head
q
Mount plate brush head according
to Fig. VIII
q
Connect water hose (VIII/2) and
solenoid valve
q
Connect electric lines and brush
motor
q
Mount separator according to Fig.
VIII
q
Connect battery plug (open seat
hood)
5.5.3 Mounting plate brushes
Lift out the brush head and switch off
by key switch before mounting or dis-
mounting the plate brushes.
q
Place plate brush onto catch and
rotate slightly until the teeth take
hold. Then pull upwards until the
hooks snap in.
Check whether all hooks have snap-
ped in by rotating the brush.
5.5.4 Dismounting plate brushes
Lift out the brush head and switch off
by key switch before mounting or dis-
mounting the plate brushes.
q
Press the plate brush down, let
snap it out and remove.
21