I Call Channel Programming - Icom IC-M421 Instruction Manual

I Call channel programming

You can program the call channel with your most often-used
channel in each channel group for quick recall.
q Push both [L] and [M]
on the transceiver to se-
lect the desired channel
group (International and
U.S.A.*) to be pro-
grammed.
*U.K. version only
w Push [16•C] for 1 sec.
to select the call chan-
nel of the selected
channel group.
• The call channel number
appears.
e Push [16•C] again for
3 sec. (until a long beep
changes to 2 short
beeps) to enter the call
channel programming
condition.
• Channel number and
WRITE" start
"CALL
blinking.
-INT----
25W-DUP-TAG-
-
23 34.154N-
135 34.351E-
- INTL - UTC-12:00-
-INT----
25W- -TAG-
-
23 34.154N-
135 34.351E-
CALLING - UTC-12:00-
-INT----
25W- -TAG-
CALL WRITE - CALL WRITE
23 34.154N-
135 34.351E-
CALLING - UTC-12:00-
r Push [L] or [M] to se-
lect the desired chan-
nel.
t Push [16•C] to program
the displayed channel
as the call channel.
• Push [CH•DUAL] to can-
cel.
• The channel number and
WRITE" stop
"CALL
blinking.
BASIC OPERATION
-INT----
25W- -TAG-
CALL WRITE - CALL WRITE
23 34.154N-
135 34.351E-
- INTL - UTC-12:00-
-INT----
25W-DUP-TAG-
23 34.154N-
135 34.351E-
INTL - UTC-12:00-
3
3
-
9