Icom IC-M421 Instruction Manual page 24

6
DSC OPERATION
D D Programming Group ID
q Push [MENU] to enter the DSC menu.
w Push [L] or [M] to select "Set up," and push [ENT].
Select Item
Polling Request
Received Calls
Distress Setting
˘Set up
e Push [L] or [M] to select "Add:Group ID," push
[ENT].
Set up
Add:INDV ID
˘Add:Group ID
DEL:INDV ID
DEL:Group ID
r Push [L] or [M] to set the Group ID.
• 1st digit '0' is fixed for a group ID.
• Push [CH•DUAL] or [16•C] to move the cursor forward or back-
ward, respectively.
• Push [SCAN•TAG] to clear the ID.
• Push [CLR] to cancel and exit the condition to the set up menu.
• "Full ID" appears when 100 DSC address IDs are already
set.
18
--DSC Menu--
≤
≥
--DSC Menu--
≥
--DSC Menu--
Add:Group ID
Input 8 digits
0________
<CLR˘Exit / ENT˘OK>
t After input the 8-digit code, push [ENT] to input up to a 10-
character ID name using [L] or [M].
• Push [CH•DUAL] or [16•C] to move the cursor forward or back-
ward, respectively.
• Push [SCAN•TAG] to clear the ID name.
• Push [CLR] to cancel and exit the condition to the set up menu.
--DSC Menu--
Add:Group ID
Input name
__________
<CLR˘Exit / ENT˘OK>
y Push [ENT] to program.
u Push [CLR] or [M] to select "Exit," push [ENT].
• Returns to the DSC menu.
• Repeat again to return to the normal operation condition.