I Dsc Individual Id - Icom IC-M421 Instruction Manual

6
DSC OPERATION

I DSC individual ID

A total of 100 DSC address IDs can be programmed and
named with up to 10 characters.
D D Programming Address ID
q Push [MENU] to enter the DSC menu.
w Push [L] or [M] to select "Set up," and push [ENT].
Select Item
Polling Request
Received Calls
Distress Setting
˘Set up
e Push [L] or [M] to select "Add:INDV ID," push [ENT].
Set up
˘Add:INDV ID
Add:Group ID
DEL:INDV ID
DEL:Group ID
r Push [L] or [M] to set the individual ID.
• Push [CH•DUAL] or [16•C] to move the cursor forward or back-
ward, respectively.
• Push [SCAN•TAG] to clear the ID.
• Push [CLR] to cancel and exit the condition to the set up menu.
• "Full ID" appears when 100 DSC address IDs are already
set.
16
--DSC Menu--
≤
≥
--DSC Menu--
≥
1st digit '0' is fixed for a group ID. When you input 1st digit '0'
and other 8 digits, the ID is automatically registered as a group
ID.
--DSC Menu--
Add:Individual ID
Input 9 digits
_________
<CLR˘Exit / ENT˘OK>
t After input the 9-digit code, push [ENT] to set up to a 10-
character ID name using [L] or [M].
• Push [CH•DUAL] or [16•C] to move the cursor forward or back-
ward, respectively.
• Push [SCAN•TAG] to clear the ID name.
• Push [CLR] to cancel and exit the condition to the set up menu.
--DSC Menu--
Add:Individual ID
Input name
__________
<CLR˘Exit / ENT˘OK>
y Push [ENT] to program.
u Push [CLR] or [M] to select "Exit," push [ENT].
• Returns to the DSC menu.
• Repeat again to return to the normal operation condition.