Icom IC-M421 Instruction Manual page 33

D D Transmitting an individual acknowledgement
When receiving an individual call, you can transmit an ac-
knowledgement ('Able to comply' or 'Unable to comply') by
using the on screen prompts (see page 38 for details). Alter-
natively, you can send an acknowledgement through the
menu system as follows.
q Push [MENU] to enter the DSC menu.
w Push [L] or [M] to select "Individual ACK," and
push [ENT].
• "Individual ACK" item appears after an individual call is
received.
--DSC Menu--
Select Item
Position Input
Individual Call
˘Individual ACK
Group Call
e Push [L] or [M] to select the desired individual address or
ID code, push [ENT].
--DSC Menu--
Select Address
˘John
Beck
Bob
<CLR˘Exit / ENT˘OK>
r Push [L] or [M] to select that you can comply to the call or
not from "Able to Comply" or "Unable to Com-
ply," then push [ENT].
• When "Unable to Comply" is selected, the reason "No
Reason Given" will be transmitted.
Push
≥
t Push [ENT] to transmit the acknowledgement call to the
selected station.
y After the individual acknowledgement call has been trans-
mitted, the specified channel (specified by the calling sta-
tion) is selected automatically when "Able to Com-
ply" is selected, or returns to the previous condition
01
02
(before entering the DSC menu) when "Unable to
03≥
Comply" is selected in step r.
DSC OPERATION
--DSC Menu--
Select Action
˘Able to Comply
Unable to Comply
<CLR˘Exit / ENT˘OK>
--DSC Menu--
Individual Call Ready
<CLR˘Exit / ENT˘OK>
6
6
27