Dsc Operation; I Mmsi Code Programming - Icom IC-M421 Instruction Manual

6

DSC OPERATION

I MMSI code programming

The 9-digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
This code programming can be performed only once.
q Turn power OFF.
w While pushing [MENU], turn power ON to enter MMSI
code programming condition.
e After the display appears, release [MENU].
r Push [MENU] again to enter the DSC menu.
t Push [L] or [M] to select "Set up," push [ENT].
Select Item
Position Input
Received Calls
˘Set up
Exit
y Push [L] or [M] to select "MMSI Check," push [ENT].
Set up
DEL:INDV ID
DEL:Group ID
Offset Time
˘MMSI Check
14
--DSC Menu--
--DSC Menu--
≤
≥
u Push [L] or [M] to set the specific 9-digit MMSI code.
•
Push [CH•DUAL] or [16•C] to move the cursor forward or back-
ward, respectively.
• Push [SCAN•TAG] to clear the MMSI code.
• Push [CLR] to cancel and exit the condition to the set up menu.
--DSC Menu--
MMSI Check
Input 9 digits
_________
<CLR˘Exit / ENT˘OK>
i After input the 9-digit code, push [ENT] to set the code.
• Returns to the set up menu.
o Push [CLR] or [M] to select "Exit," push [ENT].
• Returns to the DSC menu.
• Repeat again to return to the normal operation condition.