Parameter List - ELGO Electronic IZ15E-010 Series Operation Manual

10.3.6 Parameter list

Parameter: Description:
P01: A System configuration:
A = 0: Counting positively
A = 1: Counting negatively
P02: A Display mode (affect only the display of symbols!)
A = 0: mm-Mode / Display symbol „ mm "
A = 1: Inch-Mode / Display symbol „ Inch "
A = 2: mm-Mode / Display symbol „ m "
A = 3: mm-Mode / Display symbol „ ° "
A = 4: mm-Mode / Display non symbol
P03: A Decimal point ( 0 ... 4 )
P05: ABC Keylock:
A: Key „Set"
B: Key „Incr/Abs" (0= activated / 1= deactivated)
C: Key „*"
P08: Multiplication factor ( 0,0001 ... 9,9999 )
P09: Reference value ( -9999999 ... +9999999 )
P24: Offset ( -9999999 ... +9999999 )
P28: Saw blade value ( -9999999 ... +9999999 )
P90: (without function)
P99: Indicator in the company version
only for mm-Mode
(0= activated / 1= deactivated)
(0= activated / 1= deactivated)
36
Structure and Function
Default:
0
0
2
000
1,0000
0
0
0
0
x.xx