Interferences; Safety; Restarting After Fault Clearance - ELGO Electronic IZ15E-010 Series Operation Manual

12 Interferences

The following chapters describe possible causes for malfunction and the instructions to correct them.

12.1 Safety

WARNING!
Risk of injury by improper disposal!
Improper disposal can lead to severe disturbance to persons or
property.
Therefore:
If components need to be replaced:

12.2 Restarting after fault clearance

Once you resolve the failure:
1. Where appropriate, reset the emergency stop device
2. Where appropriate reset the fault message to the parent system
3. Ensure that there are no persons in the danger zone
4. Proceed in accordance with the instruction of section 9
Any work to rectify the fault may be performed only by
qualified and adequately instructed personnel
Before starting to work ensure sufficient space of mounting
Paying attention to orderliness and to cleanliness at the
mounting area, loose parts and tools, which are lying on
each other or lying around, are sources of accidents
Pay attention of proper mounting of the spare parts
Install all fasteners correctly again
Before restarting ensure that all covers and guards are
properly installed and working correctly
45
Interferences