Installation And Initial Start-Up; Operational Environment - ELGO Electronic IZ15E-010 Series Operation Manual

9 Installation and Initial Start-up

ADVERT
Please read the operating instructions carefully before using this
device! Installation instructions must be observed!
In case of damage caused by failure observing the installation
instructions, the warranty will be invalidated.
The ELGO Electronic GmbH & Co. KG and the subsidiaries are not
liable for injury to persons, property or financial loss, which can by
faulty material on the device and / or incurred by the related
components.
We assume no liability for damages!
The operator is obliged to take appropriate security measures and
implement it.
The commissioning should only be performed by qualified and
authorized by the operator and instructed personnel.

9.1 Operational Environment

WARNING!
Do not use the device in explosive or corrosive environments!
CAUTION!
The electrical connections are made by suitably qualified personnel in
accordance with local regulations.
The device is designed for switchboard mounting. During the work on
the switchboard, all components must be free of tension if the danger
exists, that energized parts can be touched. (Finger protection)
Wiring may only be energized!
Thin wire cable strands are equipped with ferrule!
Before switching on all ports and connectors are to be reviewed!
The device must be mounted that it is protected against harmful
environmental influences such as splashing water, solvent, vibration,
shock and severe pollution and also the operating temperature is to
maintain.
Installation and Initial Start-up
25