Fraction Display In The Inch-Mode - ELGO Electronic IZ15E-010 Series Operation Manual

10.5.5 Fraction Display in the Inch-Mode

With this key the display can be changed in the Inch-mode (parameter P02 = 1) as follows:
1x key pressed: Display Inch- fraction display
1x key pressed: Display Inch- fraction display
1x key pressed: Display Inch- fraction display
1x key pressed: Inch- Decimal Display
etc.
10.5.6 Direct input reference value
With this key combination, the reference value can be entered directly in P09,
without changing into the parameter level (see also 10.3)
After pressing the keys for about 3 seconds, the display shows the text "rEF".
If the keys are released again, the display shows the reference value P09, which can
be changed as in the parameter level.
10.5.7 Direct input saw blade value
With this key combination, the reference value can be entered directly in P28,
without changing into the parameter level (see also 10.3)
After pressing the keys for about 3 seconds, the display shows the text "-d-".
If the keys are released again, the display shows the reference value P28, which can
be changed as in the parameter level.
1x pressed
1/64 Inch
1/32 Inch
1/16 Inch
0.001 Inch
pressed for 3 sec.
1x pressed for saving this parameter
pressed for 3 sec.
1x pressed for saving this parameter
39
Structure and Function