Program 350 - Plu Link Programming - Sam4s ER-180T Series Operator's And Programming Manual

Program 350 - PLU Link Programming

When a PLU is registered, the amount of the PLU is "linked" or reported to a department.
The sale amount of the PLU will be reported in for the appropriate PLU in the PLU report
and also in the department it is linked to.
Note: If a PLU is not linked to a Department, it's sales will by default link to
Department #1.
62  Program Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 3 5 0, press the SUBTOTAL key.
3 5 0
3. Enter the PLU number (1-500) and press the PLU key.
Enter the PLU#,
(1-500)
4. Press the Department key on the keyboard where you wish the PLU sales
reported.
12
5. To program additional PLUs, repeat from step 3, or press the CASH/TEND
key to finalize the program.
CASH/TEND
(=)
SUBTOTAL
PLU
SAM4s ER-180T Operator's & Programming Manual v1.4