Engine Cranking At The Front Of Crankshaft - Daewoo KORANDO Service Manual

ENGINE CRANKING AT THE FRONT OF CRANKSHAFT

Preceding Work : Removal of cooling fan
1 Vibration Damper Assembly
2 Crankshaft Pulley
Notice
Remove the negative ground cable before proceeding the work.
Rotate the pulley in normal engine rotating direction when cranking.
Tools Required
000 589 10 99 01 Torque wrench
001 589 65 09 00 Socket
GENERAL ENGINE INFORMATION 1A2-9
3 Bolt ................................................. 8.6 ± 0.9 Nm