1B1-8 M162 ENGINE MECHANICAL
ENGINE ASSEMBLY
Tools Required
000 589 10 99 01 Torque Wrench
000 589 40 37 00 Hose Clamp
112 589 00 72 00 Oil Extractor
000 589 72 21 00 Torque Wrench
001 589 66 21 00 Torque Wrench
124 589 15 21 00 Radiator Cap Testing Unit
Removal & Installation Procedure
1. Disconnect the negative terminal of battery.
2. Remove the hood.
3. Remove the under cover.
Installation Notice
Tightening Torque
4. Disconnect the coupling of HFM sensor and remove the air
cleaner cross pipe.
5. Remove the air cleaner cover. Remove the mounting bolts
and air cleaner housing and element assembly.
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
28 - 47 Nm