Daewoo KORANDO Service Manual page 173

1B1-98 M162 ENGINE MECHANICAL
Removal & Installation Procedure
1. Remove the bolt (1) from the oil pump drive sprocket
(2) and separate the gear and the oil pump drive chain.
Installation Notice
Tightening Torque
2. Unscrew the oil pump mounting bolts (3).
Installation Notice
Tightening Torque
Tighten the baffle plate and the oil pump with the two bolts
in right side first, and then tighten the other bolt.
3. Unscrew the bolt (9) from the oil strainer bracket.
Installation Notice
Tightening Torque
4. Remove the oil pump and oil strainer assembly.
5. Replace the strainer in oil pump if necessary.
6. Installation should follow the removal procedure in the
reverse order.
29 - 35 Nm
22.5 - 27.5 Nm
9 - 11 Nm