Timing Gear Case Cover - Daewoo KORANDO Service Manual

TIMING GEAR CASE COVER

Preceding Work : Removal of cylinder head front cover
Removal of alternator bracket
Removal of tensioning device
Removal of belt pulley and vibration damper
1 Bolt (M8 x 60, 3 pieces) ................. 22.5-27.5 Nm
2 A/C Bracket
3 Bolt (M8 x 65, 3 pieces) ................. 22.5-27.5 Nm
4 Bolt (M8 x 40, 1 piece) ................... 22.5-27.5 Nm
5 Bolt (M8 x 60, 1 piece) ................... 22.5-27.5 Nm
Removal & Installation Procedure
1. Put the alignment marks (arrows) on the timing chain and
camshaft sprocket.
2. Unscrew the A/C bracket bolts (1) and remove the bracket.
Installation Notice
Tightening Torque
6 Seal
7 Timing Gear Case Cover
8 Roll Pin
9 Bolt (M6 x 22, 6 pieces) ......................... 9-11 Nm
22.5 - 27.5 Nm
M162 ENGINE MECHANICAL 1B1-37