Fire-Lite MS-9050UDC User Manual page 79

EDIT CONTROL
1=ENABLED
2=TYPE
3=SILENCEABLE
Edit Control Screen #2
MS-9050UD Series PN 52413:D 12/15/08
Type
To select the type of control module being programmed, press the 2 key while viewing the Edit
Control Screen #2. This will cause the control panel to display the following Control Type
Screens:
1=BLANK
2=BELL-CIRCUIT
3=HORN-CIRCUIT
While viewing one of the Control Type screens, select the type of control module being
programmed by pressing the corresponding keypad number key. The display will return to the
Edit Control Screen #2 and indicate the new type selection.
Notes:
1. A control relay module set to the Resettable Power type will follow the main circuit board 24
VDC resettable power unless the control relay module is disabled.
The following table contains control module type codes and their functions which are displayed
in the Control Type screens:
Control Type
Blank
Bell Circuit
Horn Circuit
Sounders
Relay
Strobe Circuit
Control
Resettable Power
HVAC SHUTDN
Note: For HVAC SHUTDN description, refer to "Control Module Operation" on page 198.
CONTROL TYPE
Control Type Screen #1
Special Function
NAC Type - Supervised
NAC Type - Supervised
NAC Type - Supervised
NAC Type - Supervised
Ignore Open Circuit
NAC Type - Supervised
NAC Type - Supervised
Relay Type - Ignore Open Circuit
Relay Type - Ignore Open Circuit
Programming
79