Table of Contents
Advertisement
Programming
OPTION MODULES
1=ANN-BUS
2=ONBOARD DACT
3=FUTURE USE
Option Module Screen
118
The Silence Button Enable (SIL BTN ENABLE) option allows the programmer to select whether
the Silence button on any installed ANN-80 annunciator will function normally or always be
ignored. Pressing 1 while viewing the ANN-80 Options Screen #2 causes the display to toggle
between Sil Btn Enable Yes (Silence button functions normally) and Sil Btn Enable No (Silence
button never functions).
The Reset Button Enable (RST BTN ENABLE) option allows the programmer to select whether
the Reset button on any installed ANN-80 annunciator will function normally or always be
ignored. Pressing 2 while viewing the ANN-80 Options Screen #2 causes the display to toggle
between Rst Btn Enable Yes (Reset button functions normally) and Rst Btn Enable No (Reset
button never functions).
The Drill Button Enable (DRL BTN ENABLE) option allows the programmer to select whether
the Drill button on any installed ANN-80 annunciator will function normally or always be
ignored. Pressing 3 while viewing the ANN-80 Options Screen #2 causes the display to toggle
between Drl Btn Enable Yes (Drill button functions normally) and Drl Btn Enable No (Drill
button never functions).
3.6.9.2 Onboard DACT
The Onboard DACT (Digital Alarm Communicator/Transmitter) provides communication to a
central station. Pressing 2 while viewing the Option Module Screen will cause the following
screens to be displayed:
1=ENABLED
2=PRIMARY PHONE
3=SECONDARY PHONE
1=RING COUNT
2=CENTRAL STATION
3=MANUAL DIAL MODE
3.6.9.2.1 Onboard DACT Enable
To enable the onboard DACT, press 1 while viewing Onboard DACT Screen #1 until the
display reads Enabled Yes. The display will toggle between Enabled Yes and Enabled No with
each press of the key. The factory default setting is Enabled No.
3.6.9.2.2 Primary Phone
Press 2 while viewing On Board DACT Screen #1 to program the type of primary phone line
being connected to the DACT. The following screen will be displayed:
PRIMARY PHONE LINE
1=TYPE
ON BOARD DACT
On Board DACT Screen #1
ON BOARD DACT
On Board DACT Screen #2
ON BOARD DACT
TOUCHTONE
Primary Phone Line Screen
YES
03
MS-9050UD Series PN 52413:D 12/15/08
Advertisement
Table of Contents
