Ann-I/O Connection To Facp - Fire-Lite MS-9050UDC User Manual

Product Description

1.9.5.3 ANN-I/O Connection to FACP

The ANN-I/O connects to the FACP via the ANN-BUS as illustrated in Figure 1.2. After the
ANN-I/O is connected to the panel, it must be added to the system via FACP programming.
Refer to the section titled "Modules Installed" on page 106.
30
ANN-I/O Module
MS-9050UD
Figure 1.2 ANN-I/O Connection to FACP
ANN-BUS and power wiring are
supervised and power-limited
MS-9050UD Series PN 52413:D 12/15/08