Table of Contents
Advertisement
Programming
EDIT CONTROL
1=ENABLED
2=TYPE
3=SILENCEABLE
Edit Control Screen #2
78
To change the programming for the displayed module, press the keyboard down arrow key to
view the following Edit Control screens:
EDIT CONTROL
1=ENABLED
2=TYPE
3=SILENCEABLE
EDIT CONTROL
1=WALKTEST
2=ZONE ASSIGNMENT
EDIT CONTROL
1=NOUN/ADJECTIVE
2=DESCRIPTION
********************
Enable/Disable Module
To Enable or Disable the control module, press the 1 key while viewing the Edit Control Screen
#2. Each press of the key will toggle the screen between Enabled Yes and Enabled No. If
Enabled No is selected, the module will not be polled by the control panel, preventing the
module from activating its output devices. The control panel will indicate a system trouble
condition and the Disable LED will turn on if any devices are disabled.
CONTROL
Edit Control Screen #2
00 ** ** ** **
Edit Control Screen #3
Edit Control Screen #4
YES
YES
YES
MS-9050UD Series PN 52413:D 12/15/08
Advertisement
Table of Contents
