Delete Module; Edit Module Screen For Monitor Module - Fire-Lite MS-9050UDC User Manual

Programming
MODULES
1=ADD
2=DELETE
3=EDIT
Modules Screen
68
Pressing 1 for Control Module or 2 for Monitor Module will cause the following screen to be
displayed:
MODULE#
IS ADDED
The programmer can continue adding modules by pressing the ESC or left arrow key which will
return the display to the Add Module Screen #1.

3.6.2.2.2 Delete Module

Pressing 2 in the Modules Screen will display the Delete Module Screen which allows the
programmer to delete a specific module:
DELETE MODULE
ENTER MODULE#
***
A flashing cursor will appear in the position of the first asterisk to the left. Using the panel
keypad, key in the module address such as 006. When the last digit is keyed in, the following
confirmation that the module has been deleted will be displayed:
DELETE MODULE
MODULE#
IS DELETED

3.6.2.2.3 Edit Module Screen for Monitor Module

The programmer can change a modules existing or factory default programming by pressing 3
in the Modules Screen. The following screen will be displayed:
ENTER MODULE ADDRESS
***
A flashing cursor will appear in the position of the first asterisk to the left. The programmer
keys in the three digit module address, such as 012.
ADD MODULE
006
Add Module Screen #3
Delete Module Screen
006
EDIT MODULE
Edit Module Screen
MS-9050UD Series PN 52413:D 12/15/08