Table of Contents
Advertisement
Programming
DETECTOR
1=ADD
2=DELETE
3=EDIT
Detector Screen
58
When the type has been selected, the following screen will be displayed:
DETECTOR#
IS ADDED
The programmer can continue adding detectors by pressing the ESC key which will return the
display to the Add Detector Screen.
3.6.2.1.2 Delete Detector
Pressing 2 in the Detector Screen will display the Delete Detector Screen which allows the
programmer to delete a specific detector:
DELETE DETECTOR
ENTER DETECTOR#
***
A flashing cursor will appear in the position of the first asterisk to the left. The programmer
keys in the three digit detector address, such as 005. When the last digit is keyed-in, the
following screen will be displayed:
DELETE DETECTOR
DETECTOR#
IS DELETED
The programmer can continue deleting detectors by pressing the ESC key which will return the
display to the Delete Detector Screen.
3.6.2.1.3 Edit Detector
The programmer can change a detectors existing or factory default programming by pressing 3
in the Detector Screen. The following screen will be displayed:
EDIT DETECTOR
ENTER POINT ADDRESS
***
A flashing cursor will appear in the position of the first asterisk to the left. The programmer
keys in the three digit detector address, such as 017.
ADD DETECTOR
005
Delete Detector Screen
005
Edit Detector Screen
MS-9050UD Series PN 52413:D 12/15/08
Advertisement
Table of Contents
