Jungheinrich DFG 660 Operating Instructions Manual page 88

Adjusting the seat position
CAUTION!
An unsecured driver's seat can cause
injury
An unsecured driver's seat can slide out of
its guide during travel, resulting in
accidents.
The driver's seat must be locked in
position.
Do not adjust the driver's seat while
travelling.
Procedure
• Sit on the driver's seat.
• Pull up the driver's seat locking lever154 in the direction of the arrow.
• Push the driver's seat forwards or backwards to the desired position
• Engage the driver's seat locking lever (154) in position.
The seat position is now correctly set.
5.3.2 Rotating Driver'S Seat
Functional Description
The driver's seat is turned by means of an
electric motor. The motor is located under
the cab.
The truck is equipped with two sets of
driving and reverse lights. The spot lights
can be activated to match the selected
travel direction. After the seat has been
turned, the main controller switches the
steering, travel direction indicator and spot
lights to the opposite direction. The
following rule applies to spot lights on the
mast: If the spot light is set to stage 1, the
spot light is lit if the driver's seat is turned
forward, and extinguished if the driver's
seat is turned to the rear. If the spot light is
set to stage 2, the spot light is lit regardless of the direction of the driver's seat.
Z
The truck cannot be moved while the direction is being changed.
The (155) button for activating the rotating driver's seat must be pressed and held
down during the entire turning process. As soon as the button is released, the turning
process stops. It is also possible to change the direction of rotation.
151
152
154
155
153
89