Jungheinrich DFG 660 Operating Instructions Manual page 148

Travel
27 Check engine oil level, top up if necessary.
28 Check engine suspension.
29 Test water pump and the fans.
30 Replace the spark plugs.
31 Replace drive axle oil.
Chassis and superstructure
1 Check chassis and screw connections for damage.
2 Check the doors and covers.
3 Check the doors and covers.
4 Check labels are legible and complete.
5 Check labels are legible and complete.
6 Check attachment and setting function of the driver's seat.
7 Check condition of the driver's seat.
Check the motor compartment for contamination and clean if
8
necessary.
Check the motor compartment for contamination and clean if
9
necessary.
10 Check attachment of the counterweight.
11 Check mast attachment / mounting.
12 Check trailer coupling or tow mechanism stop.
Check the overhead guard and / or cab are secure and check for
13
damage.
Check the overhead guard and / or cab are secure and check for
14
damage.
15 Check operator mat and steps are non-slip and damage-free.
16 Test driver's seat restraint system and check for damage.
17 Test driver's seat restraint system and check for damage.
Hydraulic Operation
Test the "hydraulic" controls and make sure the labels are present,
1
legible and complete.
Test hydraulic controls and check they are assigned to the correct
2
functions.
Check cylinders and piston rods for damage and leaks, and make
3
sure they are secure.
Check the running surfaces of the integral sideshifter and / or integral
4
fork adjuster for wear and damage, and lubricate if necessary.
Check settings and wear levels of sliding pieces and stops and
5
adjust the sliding pieces if necessary.
6 Check load chain setting and tension if necessary.
7 Check load chain lubrication and lubricate if necessary.
8 Check load chain lubrication and lubricate if necessary.
W A B C
t
t
t
t
t
W A B C
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
W A B C
t
t
t
t
t
t
t
t
149