Jungheinrich DFG 660 Operating Instructions Manual page 102

The truck travels in the selected travel direction.
56
56
Z
Adjust the automatic gearshift with the rotary button on the lever (56).
– Stage "1": transmission does not switch into 2nd gear.
– Stage "2": the truck starts in 1st gear and automatically switches to 2nd gear as
soon as the truck reaches a speed of 7-8 km/h.
Z
As soon as the speed is more than 3 - 4 km/h, the travel direction can no longer be
changed. The reversing disable makes it impossible to change the travel direction
from forward to reverse at high speed.
As soon as the speed is more than 8 km/h, it is not possible to switch from 2nd gear
to first gear.
Changing Travel Direction
Press the pedal (59) to bring the truck to a standstill. Change the travel direction with
the travel direction switch. Resume travel.
Neutral locking
If the driver leaves the truck without taking it out of gear, the truck will automatically
be set to neutral. To resume travel (sitting on the truck) all controls must be
deactivated, the travel direction switch must be set to neutral "N" and then the required
direction selected.
56
59 58
103