Jungheinrich DFG 660 Operating Instructions Manual page 144

Travel
11 Clean the engine oil cooler.
12 Check and clean radiator.
13 Check transmission for noise and leakage.
14 Replace gear oil.
15 Check tyre air pressure and top up if necessary.
16 Check tyre air pressure and top up if necessary.
17 Check wheels for wear and damage.
18 Check wheels for wear and damage.
19 Check wheel bearing and attachment.
20 Test starter motor and generator, check wires and attachment.
21 Replace the motor discharge filter.
22 Replace fuel filter.
23 Replace the fuel pre-filter.
24 Replace engine oil filter.
25 Check V belt / multi-V belt is tensioned and check for damage.
26 Replace air filter.
27 Check air filter, replace if necessary.
28 Check motor for noise and leakage.
29 Replace engine oil.
30 Check engine oil level, top up if necessary.
31 Check valve setting and adjust if necessary
32 Check engine suspension.
33 Test water pump and the fans.
34 Check glow plugs.
35 Check fuel/water separator and discharge if necessary.
36 Replace drive axle oil.
Chassis and superstructure
1 Check chassis and screw connections for damage.
2 Check the doors and covers.
3 Check the doors and covers.
4 Check labels are legible and complete.
5 Check labels are legible and complete.
6 Check attachment and setting function of the driver's seat.
7 Check condition of the driver's seat.
Check the motor compartment for contamination and clean if
8
necessary.
Check the motor compartment for contamination and clean if
9
necessary.
10 Check attachment of the counterweight.
11 Check mast attachment / mounting.
12 Check trailer coupling or tow mechanism stop.
W A B C
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
W A B C
t
t
t
t
t
t
t
t
t
t
t
t
145