Jungheinrich DFG 660 Operating Instructions Manual page 87

Adjusting the driver's weight
NOTE
To achieve optimal seat cushioning the
driver's seat must be adapted to the
driver's weight.
Set the driver's weight when the seat is
occupied.
Procedure
• Move the lever (152) as far as it will go in
the arrow direction
until you reach the required weight on the
scales.
• Move the weight adjustment lever (152) up
and down to set the seat to a higher weight.
• Move the weight adjustment lever (152) up and down to set the seat to a lower
weight.
Z
The driver's weight is correct when the arrow is in the middle of the display window
(151). The minimum or maximum weight setting is reached when you can feel a
return stroke on the lever.
• After setting the weight, move the lever (152) back in full.
The driver's weight is now set.
Adjusting the backrest
Procedure
• Sit on the driver's seat.
• Pull the lever (153) to adjust the backrest.
• Adjust the backrest tilt.
• Release the lever (153) again. The backrest is locked.
The backrest is now set.
Z
Hold the weight setting lever (152) only by the recess, never reach through
underneath the lever.
88
151
152
154 153