Arris Touchstone TG2472 User Manual page 20

3. Push the battery pack into the bay until it latches into place. If you are taking the
battery out of the Telephony Gateway, use the battery pull strap to dislodge
the battery.
Note: The Telephony Gateway will not begin operating until you apply AC power.
4. Replace the door. To do so, place the tabs of the battery door into the slot inside the
Telephony Gateway battery compartment. Rotate the door toward the front of the
Telephony Gateway until the latch snaps back into place.
1 - Battery Compartment
2 - Receiver Slot
3 - Hinge Tab
Note: Telephony Gateways use a Lithium-Ion battery pack. Please recycle or dispose of the
battery responsibly and in accordance with local ordinances.
Release 24 STANDARD 1.1 January 2015
Chapter 4: Battery Installation and Removal
Touchstone TG2472 Telephony Gateway User Guide 20