Making Your Parental Control Settings - Arris Touchstone TG2472 User Manual

Linux: open a shell window and type
interface is eth1 (unless there is no Ethernet adapter, in which case the interface is eth0).

Making Your Parental Control Settings

Follow these steps to set up your Parental Controls:
1. Access and log into the wireless configuration interface as explained in
Configuration Interface
2. Click the
Parental Controls screen.
3. Check the
4. Configure any or all of the following parental controls:
Trusted MAC Addresses:
Enter the MAC addresses of any "trusted" computers on the network and click the
button. You can add two trusted computers. Once added, these trusted computers will
not be affected by the parental control settings. For example, you may want the
computers of the father and mother to be trusted, while the childrens' computers have
parental controls in effect.
Note: Refer to the
determining the MAC address of your computer.
Keyword and Web Site Filtering:
You can add a list of keywords and web sites that you want to block. To add a keyword
or web site to the list, click the respective
from the list, first click its check box and then click the
Release 24 STANDARD 1.1 January 2015
(page 27).
Firewall
tab and then click
Enable Parental Controls
Finding the MAC Address of a Computer
Chapter 5: Installing and Connecting your Telephony Gateway
(and press Enter). The wireless
/sbin/ifconfig
Parental Controls
in the side menu to display the
checkbox and click the
Add
button. To delete a keyword or web site
Touchstone TG2472 Telephony Gateway User Guide 28
Accessing the
Apply
button.
(page 27) for information on
Delete
button.
Apply