Table of Contents
Advertisement
Loop Status Messages
Appendix A
The Express 6100/6120 displays current loop status of the IDSL on the
bottom center line of the terminal screen. The following messages are
defined:
Connected
This is seen when the Express 6100/6120 IDSL layer 1 is up. The rate
is determined by what it is configured for under Configuration/WAN/
IDSL/Rate.
Echo: Tx: X Rx: Y
The current transmit and receive count for the PPP echo request test.
Layer 1 up
The Express 6100/6120's IDSL layer 1 is up.
Link down
The IDSL link is not synchronized.
Link In Sync
The IDSL link is synchronized but layer 1 is not up.
NET EOC LOOPBACK
Express 6100/6120 has received an IDSL EOC loopback command
from the far end.
RINGING
An incoming call is ringing.
61200176L1-1
Express 6100/6120 User Manual
A-1
Advertisement
Chapters
Table of Contents
