Code Alarm professional series PROCOMP Installation Manual page 40

Professional series security and remote start
Table of Contents

Advertisement

13 - Turbo Timer: The remote start will keep the engine running for 1, 2 or 3
minutes once the parking brake is activated.
14 - Shutdown if Door Open without Unlock: When ON, the remote start will
shutdown 60 seconds after a door is opened without receiving an unlock command
from the transmitter. When using Quick Stop Mode, the user must press unlock
on the transmitter before opening the vehicle's door or the system will shutdown
60 seconds after the door opens.
15 - Manual Transmission - Enter Ready Mode: Manual transmission enter
ready mode is step 1 of 2 required to allow remote start activation. Perform 1 of
the following steps to Enter Ready Mode.
Parking Brake + Start Button - Parking brake on then activate the
remote start via the transmitter.
Parking Brake Twice - Parking brake on, off, on.
Parking Brake + Brake - Parking brake on then press the brake pedal.
16 - Manual Transmission - Activate Ready Mode: Manual transmission activate
ready mode is step 2 of 2 required to allow remote start activation. Perform 1 of
the following steps to Activate Ready Mode, once complete the remote start will
shutdown and the transmitter can then be used to remote start the vehicle.
Last Door Closed + Lock - Ready after last door is closed then lock is
pressed on the transmitter.
Last Door Closed - Ready after last door is closed.
40
2012 Audiovox Electronics Corporation. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the professional series PROCOMP and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Procomp

Table of Contents