Code Alarm professional series PROCOMP Installation Manual page 35

Feature Bank 4 - Output Control
1 - Extended Lock Pulse: Controls the timing of the BLUE and GREEN lock
output wires.
1 Second - Single 1 second lock pulse, single 1 second unlock pulse.
3.5 Seconds - Single 3.5 second lock pulse, single 3.5 second unlock pulse.
1 Second Lock, Double Pulse Unlock - Single 1 second lock pulse, double 1
second unlock pulse.
30 Second Lock, Double Pulse Unlock - Single 30 second lock pulse, double
1 second unlock pulse.
Double Pulse Lock, 1 Second Unlock - Double 1 second lock pulse, single 1
second unlock pulse.
Double Pulse Lock, Double Pulse Unlock - Double 1 second lock pulse,
double 1 second unlock pulse.
2 - Factory Disarm: Controls the timing of the LT. GREEN/BLACK factory disarm
output.
Unlock and Start - Single 1 second pulse with unlock and remote start
activation.
Unlock Only - Single 1 second pulse with unlock only.
Start Only - Single 1 second pulse when remote start is activated.
Before Unlock - Single 1 second pulse before unlock only.
Before Unlock and Start - Single 1 second pulse before unlock and when
remote start is activated.
3 - Factory Disarm Pulse: Determines a single or double pulse for the LT
GREEN/BLACK factory disarm output wire.
Single - Single 1 second pulse with unlock and remote start
activation.
Double - Double 1 second pulse with unlock and remote start
activation.
2012 Audiovox Electronics Corporation. All rights reserved. 35