Code Alarm professional series PROCOMP Installation Manual page 10

10 WHITE
Locate the vehicle's parking light wire at the vehicle light switch.
Verification: This wire will register positive voltage or ground when the
vehicle parking light switch is turned to the ON position.
Parking Light Polarity:
Connect the WHITE wire to the vehicle's parking light wire at the light switch.
Refer to Fuse Placement Diagram below for polarity.
11 RED/WHITE
Locate the vehicle's trunk release wire at the trunk release switch.
Verification: This wire will register either positive voltage or ground when the trunk
release is activated.
Trunk Release Polarity:
Connect the RED/WHITE wire to the vehicle's trunk release wire at the trunk
release switch. Refer to Fuse Placement Diagram below for polarity.
10
PARKING LIGHT OUTPUT
Positive Polarity Output
(+)
(-)
TRUNK RELEASE OUTPUT
Positive Polarity Output
(+)
(-)
Negative Polarity Output
(+)
(-)
Negative Polarity Output
(+)
(-)
2012 Audiovox Electronics Corporation. All rights reserved.