5. Communication Software Guideline
How to Connect PC Through LAN Interface?
How to Connect PC Through LAN Interface
First, install the upper computer software in the computer;
Connect VSP 112W and computer with cable, the connection diagram is
as follows:
Power on VSP 112W, start the network function, specific steps are as
follows:
The fist step: push MENU button ,get into MENU—SYSTEM—ETHERNET,
check the IP address of the equipment, the equipment factory default IP
address : 192.168.0.100.
The second step: check computer IP address, Mouse click start, choose
Run
Click <OK>,run <ipconfig>
<Enter> button,the IP address of the red circle display for the computer:
192.168.0.15 ;
VSP 112W
,run <cmd> instruct
User Manual
,
,
73