Usage Of Sd Card And Usb - RGBlink VSP 112W User Manual

6. System Setup and Operation

Usage of SD Card and USB

Usage of SD Card and USB
1.SD Card Interface
SD card input interfacing is mainly used to save video program or program
upgrade package.
2.USB1,USB2 Input Interface
USB Media playing input interface could input with USB device or portable
hard disc with USB storage function, which is used to store video program
package.
3.SD Card,USB1 and USB2 Usage Instruction
Usage instruction 1-SD Card: SD Card is priority to USB,SD card video
playing performance is better than USB. When input SD Card and USB in
the same time, system will only play SD card program and in the switching
channels system will also priority switch to SD Card channel.
SD Card requirements: Max. support 32G, format fat/fat32
Usage Instruction 2-U disk: USB1 is under USB2; USB1 is main input,
USB2 is backup input, priority to use USB1
Usage instruction 3-SD Card and U disk priority: When insert SD card and
U disk to VSP 112W in the same time, SD is priority to U disk, which mean
it will only play SD Card video program
Usage Instruction 4-Support video and graphic format;
Support Graphic format: JPGE, BMP, PNG;
Support video format: MP4, MPEG1, MPEG2, RMVB, MJPG, AVI etc.
Usage Instruction 5-Video source downloading: SD card and USB stored
video is from VSP 1123W windows control software 《Red Player Editor》
program editing and releasing
VSP 112W Windows control software;
VSP 112W User Manual 113