Faults - Bellfires UNICA 200 L Instruction For Use & Installation Instructions

Bellfi res
4

FAULTS

Possible causes for the gas fi re going out are:
• Operation of the security system due to fl ue gas escape.
• Malfunction of the security system. Check by means of testing.
• Insuffi cient gas pressure.
• Pilot light is dirty.
• Thermocouple voltage too low. This is usually caused by insuffi cient heating
at the tip of the thermocouple by the pilot light.
• Dirty electrical contacts in the thermo-electric system, wiring and connections of the
security system.
Instructions for use & Installation instructions
English
29