Bellfires UNICA 200 L Instruction For Use & Installation Instructions page 27

Bellfi res
6 FITTING THE FRONT, DOOR AND GLASS (WEAR PROTECTIVE GLOVES !!!)
First of all, check that the sealing cord on the front side of the combustion chamber is
still intact. After that, screw the front on the combustion chamber.
After verifi cation of the sealing cord in the door, the door can be screwed to the front.
7 FITTING THE OPERATING HATCH(ES)
Fit the operating hatch on the right-hand side of the opening.
Press the left hinge pin and position the hatch in the correct position or tighten the left
Phillips screw if there is one.
Hook the left and/or the right side-cover in the front.
THE APPLIANCE IS NOW READY FOR USE.
2.6 CHECKING THE APPLIANCE AFTER INSTALLATION
After installation, the installer needs to visually check the gas fl ames.
The installer should also verify, by using the appliance for the fi rst time, after
10 minutes of operation, that there is no fl ue leakage.
Instructions for use & Installation instructions
English
27