Bellfires UNICA 200 L Instruction For Use & Installation Instructions page 8

Bellfi res
English
1.3 OPERATION GENERAL
The gas regulating block, with which the fi re is operated, is located behind the operating
hatch. The fi re has one main burner which can be operated by the thermostatic knob
and/or the sliding knob.
The thermostatic knob is used to choose the correct setting and the modulating
thermostat ensures that the set temperature (13 - 38°C) is maintained.
The slider, is used to select the desired position, the burner will now continueously burn
as an atmospheric burner until the setting is changed.
Both operating knobs can be used in combination.
If the appliance is equipped with a convection fan, the fan speed can be adjusted
steplessly with the knob, located on the right-hand side of the gas regulating block.
When the appliance reaches a temperature of 40°C, the convection fan will automati-
cally be activated. After the appliance has been switched off, the fan will continue until
the temperature has fallen below 35°C.
"OFF" POSITION
SLIDER SLIDER "OFF" POSITION
THERMOSTAT "IGNITION" "IGNITION"
KNOB POSITION KNOB
Figure 1: Operation
8
Instructions for use & Installation instructions