IBM eServer xSeries 455 Type 8855 Hardware Maintenance Manual And Troubleshooting Manual page 78

Quick Test: When you select Quick Test, the following Quick Test menu is
displayed:
Select the test group. A list of all tests appears. Tests that support Quick Test have
Yes beside them. Select the tests to run, and press Enter.
Test Parameters: The Test Parameters menu is displayed when you select Edit
Batch Parameters from the Options menu.
Each item in this menu is the name of an AMIDiag menu. When you select an
AMIDiag menu choice, all AMIDiag tests on the menu are listed. Select the tests to
run in batch mode, and press Enter.
If you select a test, the parameters for that test are displayed. Set the parameters,
and select another diagnostic test. Select CONTINUE, and press Enter when you
have set all test parameters for the AMIDiag test to be run in batch mode.
68
IBM xSeries 455 Type 8855: Hardware Maintenance Manual and Troubleshooting Guide