Execution count: The Execution Count menu appears when you select
Execution Count from the Edit Batch Parameters menu.
Choose the number of times that you want to run the AMIDiag tests on the
associated AMIDiag menus. You can run each test up to 255 times. If you have set
the Passbound parameters (see the previous screen) to 5 and you set the repeat
count to 5, the test will be run a total of 25 times.
Interactive Test: When you select Interactive Test, and press Enter, the following
screen is displayed:
Select the test group. A list of all tests appears. Tests that support interactive test
have Yes beside them. Select the tests to run, and press Enter.
67
Chapter 3. Diagnostics