Table of Contents
Advertisement
IPv4 network
[Network Settings]
Select the method of how to configure the IP address from the following.
•
Static: The IP address is configured by entering manually on "IP address(IPv4)".
•
DHCP: The IP address is configured using the DHCP function.
•
Auto(AutoIP): The IP address is configured using the DHCP function. When the DHCP server is not found,
the IP address is automatically configured.
•
Auto(Advanced): Using the DHCP function, network address information is referred to, and an unused
IP address is configured to the unit as a static IP address. The configured IP address is automatically
determined within the subnet mask range by the unit. When the DHCP server is not found, the IP address
is set to 192.168.0.10.
13 Configuring the network settings [Network]
Operating Instructions
67
Advertisement
Table of Contents
