Table of Contents
Advertisement
Viewer software
It is necessary to install the viewer software "Network Camera View 4S" (ActiveX
This software can be installed directly from the unit or by selecting the [Install] button next to [Viewer
Software] on the menu of the CD-ROM provided, and then following the on-screen instructions.
IMPORTANT
•
The default setting of "Automatic installation of viewer software" is "On". Follow the instructions on
page 130 when the message is displayed on the information bar of the browser.
•
When the "Live" page is displayed for the first time, the install wizard of the ActiveX control required to
display images from the camera will be displayed. Follow the instructions of the wizard.
•
When the install wizard is displayed again even after completing the installation of the ActiveX, restart
the PC.
•
The viewer software used on each PC should be licensed individually. The number of installations of
the viewer software from the unit can be checked on the [Upgrade] tab of the "Maintenance" page
(®page 106). Refer to your dealer for the software licensing.
Preface
) to display images on a PC.
®
Operating Instructions
3
Advertisement
Table of Contents
