Table of Contents
Advertisement
2 Monitor images on a cellular phone/mobile terminal
2 Monitor images on a cellular phone/mobile
terminal
2.1 Monitor images on a cellular phone
It is possible to connect to the unit using a cellular phone via the Internet and monitor images (JPEG only) from
the unit on the screen of the cellular phone. It is also possible to refresh images to display the latest image.
IMPORTANT
•
When the authentication window is displayed, enter the user name and password. The default user
name and password are as follows.
User name: admin
Password: 12345
To enhance the security, change the password for the user "admin". (®page 56)
•
If the cellular phone in use is not compatible with UTF-8 encode, it is impossible to display the screen
correctly.
Note
•
It is necessary to configure the network settings of the cellular phone in advance to connect to the
Internet and monitor images from the unit. (®page 66)
1.
Access to "http://IP address/mobile"
cellular phone.
→
Images from the unit will be displayed.
Manual Refresh/Auto Refresh
Press the dial key "5" or the [Manual Refresh] button to refresh the camera images.
Press the [Auto Refresh] button to refresh the images from the camera in 5-second intervals.
14
Operating Instructions
or "http://Host name registered in the DDNS server/mobile" using a
*1
A
B
C
Advertisement
Table of Contents
