Table of Contents
Advertisement
•
Available range: 0-30
•
Default: 2
Destination of notification
[Address 1] - [Address 8]
Enter the destination IP address or host name of the Panasonic alarm protocol from the following. Host name
is unavailable for the IP address. Up to 8 destination server addresses can be registered.
•
[Alarm] checkbox: When the checkbox is selected, the Panasonic alarm notification will be sent when an
alarm occurs or when a video loss is recovered.
•
[Destination server address]: Enter the destination server address or host name.
–
Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and
the hyphen (-).
–
Default: None (blank)
To delete the registered destination server address, click the [Delete] button respective to the desired
destination server address.
IMPORTANT
•
When entering the host name of the "Destination server address", the DNS settings on the [Network]
tab of the "Network" page must be configured. (®page 66)
•
Confirm that the destination IP addresses are registered correctly. When a registered destination does
not exist, notification may be delayed.
10 Configure the alarm settings [Alarm]
Operating Instructions
55
Advertisement
Table of Contents
