Table of Contents
Advertisement
10.2 Configure the settings relating to the alarm
image [Alarm]
Click the [Alarm] tab on the "Alarm" page. (®page 21, page 23)
The settings relating to the alarm image to be transmitted to an FTP server can be configured in this section.
The alarm image will be transmitted to an FTP server. To transmit alarm images to an FTP server, it is
necessary to configure the settings in advance. (®page 62)
IMPORTANT
•
When "D1" is selected for "Picture (Camera) mode", alarm images cannot be transmitted.
•
Depending on the network line speed or the network traffic, images may not be transmitted at the exact
designated interval or period.
Alarm image
[FTP >>]
When "FTP >>" is clicked, the [FTP] tab of the "Server" page will be displayed. (®page 62)
[Alarm image FTP transmission]
Select "On" or "Off" to determine whether or not to transmit the alarm image to the FTP server.
•
Default: Off
[Directory name]
Enter the directory name where the alarm images are to be saved.
For example, enter "/ALARM" to designate the directory "ALARM" under the root directory of the FTP server.
•
Available number of characters: 1 - 256 characters
•
Unavailable characters: " & ;
•
Default: None (blank)
[File name]
Enter the file name used for the alarm image to be transmitted to an FTP server. The file name will be as
follows.
File name: ["Entered file name" + "Time and date (year/ month/ day/ hour/ minute/ second)"] + "Serial
number"
•
Available number of characters: 1 - 32 characters
•
Unavailable characters: " & * / : ; < > ? \ |
•
Default: None (blank)
10 Configure the alarm settings [Alarm]
Operating Instructions
47
Advertisement
Table of Contents
